Product code: HUE-E22

Fire chrome paint is one liquid, easy to paint and fast in operation.

Operation steps

1. Please wear non-chemical fiber gloves and masks before use, and pay attention to labor protection.

2. Substrate treatment: clean the surface of the target coating product to keep it smooth and clean. Use caustic soda solution to remove oil and dirt, wash and dry. Make sure the primer or basecoat is high glossy enough and totally dry, better use 2K car varnish or primer. 100% dry will be very essential, not regular dry degree.

3. For coating construction, brush or spray gun can be selected. It is recommended to apply twice at an interval of several minutes to ensure proper coating thickness. After several minutes of coating, the surface can be sprayed with flame until the white silver mirror effect can be seen, if see a little yellowish mirror that means fire power not enough, can keep heating till it gets whiter silver effect, the flame power should be strong enough. If it is necessary to speed up the construction, the surface can be quickly dried with a blower after coating, and then the flame can be sprayed onto it at once. Pay attention not to heat at a fixed point for a long time to prevent damaging the substrate or primer.

4. If you need to make a color chrome mirror effect, you can choose HUE candy paint series products to spray and cover. spray topcoat at once after chrome get out enough. Use indoors, avoid UV ray radiation.